{{org_field_logo}}
{{org_field_name}}
Registration Number: {{org_field_registration_no}}
Electrical Safety and Maintenance Policy
1. Purpose
The purpose of this policy is to ensure that all electrical installations, systems and equipment used at {{org_field_name}} are installed, used, inspected, maintained and, where necessary, tested in a manner that prevents danger so far as is reasonably practicable and protects individuals receiving care and support, staff, visitors and other persons who may be affected.
{{org_field_name}} will comply with the Health and Safety at Work etc. Act 1974, the Electricity at Work Regulations 1989, the Provision and Use of Work Equipment Regulations 1998 where applicable, the Regulation and Inspection of Social Care (Wales) Act 2016 and the Regulated Services (Service Providers and Responsible Individuals) (Wales) Regulations 2017, as amended.
In particular, {{org_field_name}} will ensure that its premises, facilities and equipment are suitable for the service, are properly maintained, are free from avoidable electrical hazards so far as is reasonably practicable, and that risks to the health and safety of individuals are identified and reduced so far as reasonably practicable. Electrical safety arrangements will be maintained in accordance with applicable legislation, current national guidance, manufacturers’ instructions and the advice of competent persons.
2. Scope
This policy applies to all staff, contractors, and maintenance personnel who use or work on electrical installations and equipment at {{org_field_name}}. It covers the fixed electrical systems, portable electrical appliances (PAT), lighting, emergency power sources, and specialist care equipment that requires electricity. It applies to all areas of the home including resident rooms, kitchens, laundry rooms, plant rooms, communal areas, and offices.
3. Related Policies
This policy should be read in conjunction with:
CHW11 – Safe Care and Treatment Policy
CHW16 – Health and Safety at Work Policy
CHW17 – Infection Prevention and Control Policy
CHW18 – Risk Management and Assessment Policy
CHW19 – Emergency and Business Continuity Plan
CHW20 – Fire Safety and Evacuation Procedures
CHW24 – Management of Accidents, Incidents and Near Misses Policy
4. Policy Statement and Implementation
4.1 Legal Responsibilities and Duty of Care
{{org_field_name}} will ensure that electrical systems, installations and equipment are managed so as to prevent danger so far as is reasonably practicable. The Registered Manager is responsible for ensuring that suitable arrangements are established and maintained for the identification, assessment and control of electrical risks within the service.
A suitably competent person will be designated to co-ordinate electrical safety arrangements, including planned inspections, maintenance, remedial work, record keeping and liaison with electrical contractors.
Electrical installation, inspection, testing, maintenance or repair work must only be undertaken by persons who are competent to carry out the particular work safely. Competence will be determined by reference to the person’s training, qualifications, knowledge, skills, experience and the nature and complexity of the work to be undertaken. Where specialist electrical work is required, {{org_field_name}} will use an appropriately qualified and competent electrical contractor and will obtain evidence of competence and appropriate insurance before work begins.
Staff who are not competent and authorised to undertake electrical work must not carry out electrical installation, alteration, repair or testing. Staff may undertake routine user checks or visual checks only where they have received appropriate instruction and where those checks do not involve dismantling electrical equipment or exposure to electrical parts.
4.2 Electrical Risk Assessment
{{org_field_name}} will identify and assess foreseeable electrical risks arising from the premises, electrical installation, electrical equipment and the manner in which electrical equipment is used within the service.
Electrical risk assessments will consider, where relevant:
- the condition and suitability of the fixed electrical installation;
- portable, movable and fixed electrical equipment;
- electrical equipment used in bedrooms, bathrooms, kitchens, laundry areas, plant rooms and other higher-risk locations;
- equipment used near water or in damp environments;
- extension leads, adaptors and charging equipment;
- electrically powered care equipment;
- equipment belonging to individuals;
- the potential for damage, misuse, overloading or unauthorised alteration;
- the needs, behaviours and abilities of individuals who may be exposed to electrical hazards;
- the effect of loss of electricity on essential care and support;
- the findings of previous inspections, tests, maintenance records and incidents; and
- any recommendations made by competent persons.
Control measures will be proportionate to the risk identified and will be implemented without unnecessary delay. Where an electrical condition presents an immediate danger, the equipment or affected electrical supply will be removed from use, isolated or otherwise made safe immediately.
Electrical risk assessments will be reviewed when there is reason to believe they are no longer valid, following a significant electrical incident or defect, when significant changes are made to the premises or electrical installation, when significant new electrical equipment is introduced, and where changes in the needs of individuals may alter the level of risk.
4.3 Fixed Electrical Installation Inspection and Testing
The fixed electrical installation at {{org_field_name}} will be maintained in a safe condition so as to prevent danger so far as is reasonably practicable.
Periodic inspection and testing will be undertaken by a competent person at intervals determined by the condition, use and environment of the installation, the findings of previous inspection and testing, applicable technical standards and the recommendations of the competent electrical contractor.
As a care home, the service will normally arrange periodic inspection and testing of the fixed electrical installation, documented through an Electrical Installation Condition Report (EICR), at intervals not exceeding five years unless a shorter interval is specified by the competent person, previous inspection report, risk assessment or other applicable requirement.
The inspection and testing will cover the parts of the fixed electrical installation necessary to determine whether the installation is safe for continued use, including relevant distribution equipment, circuits, protective devices, earthing and bonding arrangements, sockets, fixed wiring and other parts of the installation within the scope of the inspection.
Any defect identified through an EICR or other electrical inspection will be assessed according to the risk presented. Dangerous or potentially dangerous defects will be made safe immediately and appropriate remedial work will be completed without avoidable delay. Any equipment or circuit that cannot safely remain in use will be isolated or otherwise taken out of service until it has been made safe.
EICRs, associated certificates, records of defects and evidence of completed remedial work will be retained by the service and made available to the Registered Manager, Responsible Individual, competent persons and Care Inspectorate Wales where required.
4.4 Portable and Movable Electrical Equipment
All portable and movable electrical equipment for which {{org_field_name}} has responsibility will be maintained in a safe condition so as to prevent danger.
The service will operate a risk-based system of user checks, formal visual inspection and, where appropriate, electrical inspection and testing.
Portable Appliance Testing (PAT) will be undertaken where this is identified as an appropriate means of demonstrating that equipment remains safe. PAT is not automatically required at the same interval for every item of equipment.
The nature and frequency of checking, inspection and testing will be determined according to factors including:
- the type and construction of the equipment;
- the manufacturer’s instructions;
- the environment in which the equipment is used;
- how frequently the equipment is moved or handled;
- the likelihood of damage or deterioration;
- the persons using the equipment;
- the results of previous inspections and tests; and
- the findings of the service’s electrical risk assessments.
Equipment that is moved frequently, used intensively or exposed to conditions that increase the likelihood of damage will be subject to more frequent checks, inspection or testing where the risk assessment indicates this is necessary.
Formal electrical inspection and testing will be undertaken by a person competent to carry out the relevant inspection or test and to interpret the results.
Records will be maintained where formal inspection or testing is undertaken. The service may use equipment labels to assist with maintenance control and identification, but the absence of a label must not be treated as the sole determinant of whether equipment is safe.
Any appliance showing signs of damage, deterioration or unsafe operation will be removed from use immediately, clearly identified as not for use where necessary, and referred for competent inspection, repair or safe disposal.
4.5 User Checks, Visual Checks and Staff Responsibilities
All staff have a responsibility to use electrical equipment safely and to report electrical defects or hazards without delay.
Staff will receive appropriate instruction on the visual signs of electrical damage and deterioration relevant to the equipment they use. User checks will be undertaken at a frequency proportionate to the risk and, where appropriate, before equipment is used.
Checks may include looking for:
- damaged, loose or cracked plugs, sockets or connectors;
- frayed, cut, crushed or otherwise damaged cables;
- exposed internal wires or conductors;
- loose cable grips or connections;
- burn marks, staining, overheating or unusual smells;
- evidence that equipment has become wet or contaminated where this may affect electrical safety;
- damage to the equipment casing;
- inappropriate or damaged extension leads or adaptors; and
- any abnormal operation that may indicate an electrical defect.
Any item suspected of being electrically unsafe must be switched off and disconnected where it is safe to do so, removed from use and reported promptly to the senior person on duty or maintenance team. The defect and action taken will be recorded in the appropriate maintenance system.
Staff must not dismantle, modify, repair or electrically test equipment unless they are competent and authorised to undertake that work.
4.6 New, Resident-Owned and Personally Owned Electrical Equipment
Electrical equipment introduced into the service, whether purchased or supplied by {{org_field_name}}, supplied by a contractor, or brought into the home by an individual, representative, visitor or member of staff, must not be used where there is reason to believe that it may present an electrical risk.
New equipment supplied by a reputable manufacturer or supplier will normally be subject to a visual check for obvious damage, confirmation that it is appropriate for its intended use and confirmation that any relevant manufacturer’s instructions are available. Formal electrical testing of new equipment will not be undertaken automatically unless required by the risk assessment, manufacturer, competent person or because there is reason to question the equipment’s safety.
Electrical equipment brought into the care home by individuals or their representatives will be incorporated into the service’s electrical safety arrangements where the equipment could create a risk to the individual or others. The equipment will be visually checked and, where indicated by its age, condition, history, construction or intended use, will be inspected or tested by a competent person before or during its continued use.
Staff must obtain authorisation before using personally owned electrical equipment for work purposes. Any authorised item will be subject to the same risk-based electrical safety arrangements as other equipment used by the service.
Where equipment is found to be unsafe, its use will be prevented until it has been repaired by a competent person or otherwise made safe.
4.7 Planned Maintenance, Defects and Repairs
Electrical installations, systems and equipment will be maintained in accordance with applicable legal requirements, risk assessment findings, relevant technical guidance and manufacturers’ instructions so as to prevent danger and maintain the safety of the care environment.
{{org_field_name}} will maintain planned maintenance arrangements appropriate to the electrical systems and equipment used within the service. These arrangements will include relevant fixed electrical installations and electrically powered systems and equipment upon which the safe delivery of care depends.
Electrical defects will be assessed according to the risk presented. Where a defect presents an immediate or potentially serious risk, the affected equipment, circuit or area will be taken out of use, isolated or otherwise made safe without delay.
Electrical repair, alteration, maintenance or testing requiring specialist electrical competence will only be undertaken by a person who has the appropriate knowledge, skills, training and experience to undertake the work safely.
Records will be maintained of planned maintenance, identified defects, repairs, inspections, testing and remedial action. Where a competent person specifies further action or a timescale for remedial work, this will be recorded, monitored and completed according to the level of risk.
4.8 Electrical Emergencies and Loss of Power
In the event of an electrical fault, electrical fire, dangerous electrical condition or loss of mains power, staff will take immediate action to protect individuals, staff and others from harm.
Where it is safe to do so, the affected electrical equipment or supply will be switched off or isolated. Staff must not enter an unsafe area, touch damaged electrical equipment or attempt electrical repairs unless they are competent and authorised to do so.
The Registered Manager or senior person on duty will ensure that:
- emergency services or an emergency electrical contractor are contacted where required;
- individuals are moved away from any immediate danger where necessary;
- essential care and support continues safely;
- emergency or alternative lighting and other contingency arrangements are activated where required;
- electrically dependent care equipment is managed in accordance with the individual’s personal plan, equipment-specific contingency arrangements and the service’s business continuity plan;
- fire procedures are followed where there is evidence of fire, smoke or overheating; and
- the incident and actions taken are recorded.
Where loss of electricity affects the service’s ability to provide safe care, the Emergency and Business Continuity Plan will be implemented and appropriate escalation arrangements will be followed.
The Registered Manager and Responsible Individual will ensure that any electrical incident is reported to Care Inspectorate Wales, the Health and Safety Executive, the local authority, emergency services or another statutory body where the relevant legal notification or reporting criteria are met.
Reporting under the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 will be completed where the incident is reportable under those Regulations.
Following any significant electrical incident or prolonged loss of power, the service will review the cause, response and effectiveness of its control measures and will implement any necessary corrective action.
4.9 Individual and Visitor Safety
Electrical risks within areas accessible to individuals and visitors will be assessed and controlled according to the nature of the environment and the needs, abilities and behaviours of the individuals using the service.
Sockets, switches, electrical equipment, cables and other electrical installations will be maintained in a safe condition and positioned, protected or otherwise controlled where necessary to reduce foreseeable risk.
Electrical safety controls will be based upon risk assessment and competent advice rather than the routine use of non-standard electrical accessories.
Extension leads and multi-way adaptors will only be used where necessary, suitable for the intended load and environment, maintained in good condition and positioned so that they do not create electrical, fire or trip hazards. Extension leads must not be overloaded or used as a permanent substitute for adequate fixed socket provision.
Electrical equipment brought into the home by individuals or their representatives will be managed in accordance with Section 4.6 of this policy.
Where an individual’s needs, behaviour, cognitive impairment or other circumstances create an increased electrical risk, appropriate individualised risk-control measures will be agreed, recorded and reviewed without unnecessarily restricting the individual’s independence, choice or rights.
4.10 Staff Training, Instruction and Competence
Staff will receive electrical safety information, instruction and training appropriate to their role and the electrical risks they may encounter.
Relevant staff training will include:
- recognising common signs of electrical damage or deterioration;
- safe use of electrical equipment;
- action to take when electrical equipment appears unsafe;
- removing defective equipment from use;
- reporting electrical defects and hazards;
- action to take during electrical emergencies or loss of power; and
- the limits of the electrical tasks that staff are authorised to undertake.
Staff must not undertake electrical installation, repair, alteration or electrical testing unless they have been assessed as competent and authorised to undertake the specific task.
Persons carrying out specialist electrical work must possess the training, knowledge, skills and experience necessary to prevent danger. The service will obtain and retain appropriate evidence of contractor competence and insurance for specialist work.
Training and competence requirements will be reviewed when equipment, systems, staff responsibilities or identified risks change.
4.11 Record Keeping, Audit and Monitoring
The Registered Manager will ensure that sufficient records are maintained to demonstrate that electrical risks are being identified, assessed, controlled and reviewed and that electrical installations and equipment are being maintained in a safe condition.
Records will include, where applicable:
- electrical risk assessments;
- Electrical Installation Condition Reports and associated certificates;
- records of defects identified through electrical inspection or testing;
- evidence of completed remedial work;
- records of risk-based portable equipment inspections and testing where undertaken;
- planned and reactive maintenance records;
- equipment inventories and maintenance schedules where these are necessary for effective safety management;
- records relating to electrically powered equipment used to provide care and support;
- relevant contractor competence and insurance documentation;
- staff electrical-safety training records;
- records of electrical incidents, accidents and near misses;
- records of actions arising from electrical incidents or identified hazards; and
- records of significant electrical failures or interruptions to essential services.
Electrical safety arrangements will be monitored as part of the service’s health and safety and quality assurance systems.
The Registered Manager will ensure that identified deficiencies are acted upon according to the level of risk and that overdue or incomplete remedial work is escalated appropriately.
The effectiveness of electrical safety controls will be reviewed following significant defects, incidents, changes to the premises or electrical installation, introduction of significant new equipment, changes in the needs of individuals using the service, or advice from a competent person or relevant regulatory authority.
Relevant findings and trends will be considered within the service’s governance and quality assurance arrangements.
5. Policy Review
This policy will be reviewed at least annually and sooner where necessary to ensure that it remains current, effective and consistent with applicable legislation, statutory guidance and the requirements of Care Inspectorate Wales.
An earlier review will be undertaken where appropriate following:
- a change in relevant legislation, statutory guidance or regulatory requirements;
- publication of relevant national electrical-safety guidance;
- a significant electrical incident, accident or near miss;
- a significant electrical defect or failure;
- changes to the premises or fixed electrical installation;
- the introduction of significant new electrical systems or equipment;
- recommendations made by a competent electrical person or relevant regulatory authority; or
- audit findings indicating that the policy or associated procedures are not operating effectively.
The Registered Manager is responsible for ensuring that this policy is implemented, that staff understand the requirements relevant to their roles, and that identified electrical safety actions are completed according to the level of risk. The Responsible Individual will maintain appropriate oversight of the effectiveness of the service’s arrangements in accordance with the regulatory governance framework.
Responsible Person: {{org_field_registered_manager_first_name}} {{org_field_registered_manager_last_name}}
Reviewed on: {{last_update_date}}
Next Review Date: {{next_review_date}}
Copyright © {{current_year}} – {{org_field_name}}. All rights reserved.